Liquid analysis
-
Conducell 4UxF sensors 243590 To productSpecifications
- Manufacturer: Hamilton
- application: conductivity measurement in various industries
- range: 1 uS/cm ÷ ~300 mS/cm
- pressure: 0 ÷ 20 bar
- temperature: -20 ÷ 150 °C
- material: stainless steel 1.4435, Hastelloy C 2.4602, titanium, platinum
- electrical connection: Arc, VP6
-
Polilyte Plus pH Electrode 242428 To productSpecifications
- Manufacturer: Hamilton
- application: chemical / petrochemical industries, process water, waste water
- range: 0 ÷ 14 pH
- pressure: 0 ÷ 16 bar
- temperature: 130 °C
- material: glass / FKM
- electrical connection: VP6, S8, MS, Arc
-
EasyFerm Plus pH electrode 238633 To productSpecifications
- Manufacturer: Hamilton
- application: pharmaceutical and chemical industries
- range: 0 ÷ 14 pH
- pressure: 0 ÷ 6 bar
- temperature: 0 ÷ 100 °C
- material: glass / EPDM
- electrical connection: S8, K8, VP6, Arc, MS
-
Inchtrode electrode inchtrode_electrode To productSpecifications
- Manufacturer: Hamilton
- application: popieriaus ir chemijos pramonė
- range: 0 ÷ 14 pH
- pressure: 0 ÷ 10 bar
- temperature: 130 °C
- material: stiklas / PVDF ar PPS
- electrical connection: VP6, fiksuoto ilgio kabėlis
- range: 0 ÷ 14pH
- application: paper and chemical industries
-
Conducell UPW conductivity sensors conducell_UPW_conductivity_sensors To productSpecifications
- Manufacturer: Hamilton
- application: liquids with low conductivity
- range: 0.01 – 1500 µS/cm
- pressure: 0 ÷ 10 bar
- temperature: analog 0 ÷ 110 °C, digital 0 ÷ 130 °C
- material: Stainless steel 1.4435, Hastelloy C 2.4602, Titanium, Platinum
- electrical connection: VP8
-
pH 298 analog pH/ORP controller 19123€1,254.00To productSpecifications
- Manufacturer: WTW
- parameters: pH/ORP
- range: -2÷16pH; -2000÷ 2000mV
- output: 2 x RO, 2 x AI
- supply: 100÷240VAC / 18 ÷ 36 VDC
- communication: ModBus, USB
- temperature: -10 ÷ 55°C
- warranty: 2 years
-
Oxi 298 analog oxygen controller 29123€1,378.00To productSpecifications
- Manufacturer: WTW
- parameters: O2
- range: 0 ÷ 20mg/l, 0 ÷ 200%
- output: 2 x RO, 2 x AI
- supply: 100÷240VAC / 18 ÷ 36 VDC
- communication: ModBus, USB
- temperature: -10 ÷ 55°C
- warranty: 2 years
-
LF 298 analog conductivity controller 39123€1,441.00To productSpecifications
- Manufacturer: WTW
- parameters: Conductivity
- range: 0 ÷ 500 mS/cm
- output: 2 x RO, 2 x AI
- supply: 100÷240VAC / 18 ÷ 36 VDC
- communication: ModBus RS485, USB
- temperature: -10 ÷ 55°C
- warranty: 2 years
-
SensoLyt® 650-7 pH sensor 109195€805.00To productSpecifications
- Manufacturer: WTW
- parameters: pH + T
- method: potentiometric
- range: 2 ÷ 14pH
- pressure: 10bar
- temperature: -5 ÷ 60°C
- connection: fixed 7m cable
- warranty: 2 years
-
InchTrode pH electrode inchtrode_electrode_hamilton To productSpecifications
- Manufacturer: Hamilton
- application: paper and chemical industries
- range: 0 ÷ 14 pH
- pressure: 0 ÷ 10 bar
- temperature: 130 °C
- material: glass / PVDF or PPS
- electrical connection: VP6, fixed cable
-
EasyFerm Bio electrode EasyFerm_Bio_electrode To productSpecifications
- range: 0 ÷ 14pH
- application: pharmaceutical and chemical industries
-
MIQ/TC 2020 3G Terminal / Controller 470020€2,620.00To productSpecifications
- Manufacturer: WTW
- display: graphic, 320x240pxs
- voltage: 100 ÷ 240VAC
- temperature: -20 ÷ 55ºC
- interface: USB, Modbus, Profibus..
- protection class: IP66
- dimensions: 210x170x40mm
- number of channels: up to 20
- input: all IQ sensors
- output: see MIQ modules
12
- 12
- 24
- 36











